Kiosk & Terminal Enclosures

Dark grey self-service kiosk enclosure with sloped screen face
kiosk enclosure production view, weld seams ground flat before coatingHow it's builtWeld seams ground flat before coating, so the face reads as one panel.
See it built

Self-service kiosk and terminal bodies with a sloped screen face, tempered glass overlay and front service access. Built for ticketing, queue management, check-in and payment terminals that sit in public space and get touched all day.

The sloped face is an optical decision, not a styling one

How far the screen leans back decides where the reflection of the ceiling goes. A standing user looks down at the screen, so the panel tilts up towards them; tilt it too little and the ceiling lights land in the middle of the display, tilt it too much and the user has to bend. The 15 to 20 degree band is where most standing public terminals settle, and it is set together with screen brightness and the lighting expected at the site, not chosen from a picture.

The slope also has to be a flat surface, not just an angled one. A tempered glass overlay bonded onto a face that is not flat will lift at one edge, and once it lifts it collects dust and eventually cracks. The sloped panel is formed and then checked for flatness across the glass footprint before assembly.

Vandal resistance is a thickness and a joint question

A terminal in a station or a mall is struck, kicked and leaned on. Resistance comes from three things together: a 2.0 mm front frame rather than 1.5, a three-point lock rather than a single cam, and a 3 mm tempered glass sheet in front of the display so the impact is spent on glass that is designed to take it. Any one of those alone is not enough, and the weakest of the three sets the result.

Service access has to come from the front

These units are usually bolted to a floor plate or embedded in a wall, so the maintenance technician cannot swing the whole body around. The lower cabinet opens from the front for the PC, the bill acceptor and the cabling, and cable entry sits at the base where it can be reached without lifting the unit. A rear-only service door turns a five minute job into a two person job.

Where the heat actually goes

A kiosk runs a PC, a display and often a printer or a heater in a sealed box in direct sun. Louvre banks at the base and an exhaust path at the top are designed as a flow, and the internal layout keeps the printer away from the intake so paper does not sit in the hottest corner of the cabinet.

Technical Specifications

MaterialSPCC cold-rolled steel
Thickness1.5 mm body, 2.0 mm front frame
SurfaceDark grey or custom RAL powder coat
ProtectionIP54
Screen size15 to 32 inch
Tilt angle15 - 20 degrees, set to site lighting
Glass3 mm tempered overlay
LockingThree-point lock on the service door
MOQ20 pcs

Typical Applications

Related Products

Get a quote for Kiosk & Terminal Enclosures

Tell us quantity, material and surface finish — we reply within 24 hours with price and lead time.